印花設備專用油加熱器
1、 循環泵：5.5HP油泵。
2、加熱功率：36KW（18+18KW）
3、 熱油出入口：DN40法蘭式截止閥1.5＂內螺紋
4、 冷卻水：3/4＂球閥
>>機型特點 Main feature
● 最高使用溫度300℃ Highest temperature reaching 300℃
● 按鍵式操作面板，操作簡單 The panel control adopted micro, easy operation
● 采用連軸式熱媒油泵浦，泵浦流量大，使用壽命長 usehot oil pump of axis-connection type with big flow rate and long service life
● 可指定選用德國KSB、德國SPECK、德國ALLWEILER熱媒油泵浦 KSB, SPECK, ALLWEILER hot oil pump from Germen is available
● 采用TAT法蘭式球閥及法蘭式過濾 器 TAT flanged ball valves and flange type filter
● “OMRON”、“SCHNEIDER”控制零件 Controlling parts of OMRON, FUJI brand
● 自動排氣和帶手動模具回油功能 Full automatic exhaust function and manual mode die oil return function
● 出油溫度顯示 temp. indication of oil output and return
● 多段加熱控制，功率可自行調整 multi-zone heating control with power self-adjusting function
● 電氣配電箱采用雙重隔離及散熱設計 Double-insulation/heating dissipation design for the electric distributioin cabinet
● 減少廢品率、減少加熱時間、增加模具/模板壽命 Increase the service life of mold/ templet and reduce the waste rate and the heating time
● 特殊管路系統設計，傳熱油不氧化，壽命長Special design for pipeline system in which the heat-transfer oil is not oxidized with a long lifecycle.
● 采用高溫保溫材料隔熱處理，節約能源及熱量損失小High-temperature insulation materials can be adopted on the heat insulation so as to save energy and reduce heat loss.
● 故障指示，維修不用專業人員Fault indication function which allows maintenance without professional maintainers.
>>安全保護系統
● 總電源過電流無熔絲斷路器 Circuit breaker
● 異常警告指示燈系統 Alarm system
● 馬達反轉保護及指示燈 motor rollback protective lamp
● 異常警告蜂鳴器 Alarm sounding
● 缺油保護及指示燈Oil lack protective lamp
● 保溫隔熱處理 Insulation heating system
● 過熱保護及指示燈 over-heat protective
● 回油溫度顯示表Oil reture display
● 循環泵浦過載保護及指示燈Circuiting pump overload protective lamp
● 電源欠相保護 Power protection
● By-Pass油壓回路 By-pass hydrauic circuit
●接觸器卡死報警提示，超高溫?cái)嚯姽δ?有效預防著火.
>>產品參數Specification
